Xilinx Inc.
تصویر کی نمائندگی ہو سکتی ہے۔
پروڈکٹ کی تفصیلات کے لیے وضاحتیں دیکھیں۔
XC2C384-10PQG208I
تفصیل دیکھیں ڈیٹا شیٹ

XC2C384-10PQG208I

Product Overview

Category

The XC2C384-10PQG208I belongs to the category of complex programmable logic devices (CPLDs).

Use

It is used for implementing high-performance, low-cost logic designs in a wide range of applications.

Characteristics

  • High performance and low power consumption
  • Flexible and reconfigurable logic
  • Wide operating temperature range
  • Small form factor

Package

The XC2C384-10PQG208I is available in a 208-pin plastic quad flat pack (PQFP) package.

Essence

The essence of this product lies in its ability to provide a cost-effective and versatile solution for logic implementation in various electronic systems.

Packaging/Quantity

The XC2C384-10PQG208I is typically packaged in trays or reels and is available in varying quantities based on customer requirements.

Specifications

  • Logic Elements: 384
  • Maximum Operating Frequency: 150 MHz
  • I/O Pins: 160
  • Operating Voltage: 1.5V to 3.3V
  • Operating Temperature: -40°C to 100°C
  • Programmable Logic Blocks (PLBs): 192
  • Total RAM Bits: 4,608 bits
  • JTAG Support: Yes

Detailed Pin Configuration

The detailed pin configuration for the XC2C384-10PQG208I can be found in the manufacturer's datasheet.

Functional Features

  • In-system programmability
  • Fast propagation delay
  • On-chip clock generation
  • Dedicated carry chain for arithmetic functions
  • Flexible I/O standards

Advantages and Disadvantages

Advantages

  • Low power consumption
  • High logic density
  • Reconfigurability
  • Wide operating temperature range

Disadvantages

  • Limited resources compared to larger FPGAs
  • Limited support for high-speed interfaces

Working Principles

The XC2C384-10PQG208I operates based on the principles of configurable logic, where the internal logic elements and interconnections can be programmed to implement custom logic functions.

Detailed Application Field Plans

The XC2C384-10PQG208I is well-suited for applications such as: - Industrial control systems - Communication equipment - Automotive electronics - Test and measurement instruments - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to the XC2C384-10PQG208I include: - XC2C256-7TQG144C - XC2C512-7TQG144I - XC2C768-7TQG144I

In conclusion, the XC2C384-10PQG208I is a versatile CPLD that offers high performance and flexibility for a wide range of applications. Its compact size, low power consumption, and reconfigurability make it an ideal choice for designers seeking cost-effective logic implementation solutions.

[Word count: 411]

تکنیکی حل میں XC2C384-10PQG208I کے اطلاق سے متعلق 10 عام سوالات اور جوابات کی فہرست بنائیں

  1. What is XC2C384-10PQG208I?

    • XC2C384-10PQG208I is a CoolRunner-II CPLD (Complex Programmable Logic Device) from Xilinx, featuring 384 macrocells and operating at a speed grade of -10.

  2. What are the typical applications of XC2C384-10PQG208I?

    • It is commonly used in applications such as industrial control systems, communication equipment, automotive electronics, and consumer electronics.

  3. What are the key features of XC2C384-10PQG208I that make it suitable for technical solutions?

    • The device offers low power consumption, high logic density, fast performance, and reprogrammability, making it ideal for various embedded and control applications.

  4. How does XC2C384-10PQG208I compare to other CPLDs in terms of performance and capabilities?

    • XC2C384-10PQG208I offers a good balance of logic capacity, speed, and power efficiency, making it a popular choice for mid-range CPLD applications.

  5. What development tools and software support XC2C384-10PQG208I?

    • Xilinx provides a range of development tools such as ISE Design Suite and programming hardware like Platform Cable USB for configuring and programming XC2C384-10PQG208I.

  6. Can XC2C384-10PQG208I be used in safety-critical applications?

    • Yes, with proper design considerations and adherence to relevant safety standards, XC2C384-10PQG208I can be used in safety-critical applications.

  7. What are the recommended operating conditions and power supply requirements for XC2C384-10PQG208I?

    • The device typically operates at a voltage range of 1.425V to 1.575V and requires a stable power supply to ensure reliable performance.

  8. Are there any known limitations or constraints when using XC2C384-10PQG208I in technical solutions?

    • While XC2C384-10PQG208I offers many benefits, designers should be mindful of its finite resources and plan their designs accordingly to avoid resource constraints.

  9. What are some common design challenges when integrating XC2C384-10PQG208I into a technical solution?

    • Designers may encounter challenges related to timing closure, pin assignment optimization, and efficient use of available resources when working with XC2C384-10PQG208I.

  10. Where can I find additional resources and support for designing with XC2C384-10PQG208I?

    • Xilinx's website, forums, application notes, and user guides provide valuable resources for designers looking to implement XC2C384-10PQG208I in their technical solutions.