Torex Semiconductor Ltd
تصویر کی نمائندگی ہو سکتی ہے۔
پروڈکٹ کی تفصیلات کے لیے وضاحتیں دیکھیں۔
XC6124E722MR-G
تفصیل دیکھیں ڈیٹا شیٹ

XC6124E722MR-G

Product Overview

Category

XC6124E722MR-G belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize voltage in electronic circuits.

Characteristics

  • Compact size
  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6124E722MR-G comes in a small surface-mount package.

Essence

The essence of XC6124E722MR-G is to provide a stable and regulated voltage supply to electronic devices.

Packaging/Quantity

The product is typically packaged in reels and the quantity per reel varies depending on the manufacturer.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.3V
  • Output Current: 200mA
  • Dropout Voltage: 150mV @ 100mA
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124E722MR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation and stabilization
  • Overcurrent protection
  • Thermal shutdown protection
  • Low dropout voltage for efficient power conversion

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into small electronic devices
  • High efficiency results in minimal power loss during voltage conversion
  • Wide input voltage range provides flexibility in various applications
  • Overcurrent protection safeguards connected devices from excessive current flow
  • Thermal shutdown protection prevents overheating and damage to the regulator

Disadvantages

  • Limited output current capacity may not be suitable for high-power applications
  • Dropout voltage may cause a slight decrease in the output voltage under heavy load conditions

Working Principles

XC6124E722MR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage despite changes in input voltage or load conditions.

Detailed Application Field Plans

XC6124E722MR-G can be used in various electronic applications, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable devices - Embedded systems

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6124E722MR-G are: - XC6206P332MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT

These alternatives can be considered based on specific requirements and availability.

Word count: 314 words

تکنیکی حل میں XC6124E722MR-G کے اطلاق سے متعلق 10 عام سوالات اور جوابات کی فہرست بنائیں

Sure! Here are 10 common questions and answers related to the application of XC6124E722MR-G in technical solutions:

  1. Q: What is XC6124E722MR-G? A: XC6124E722MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Q: What is the operating voltage range of XC6124E722MR-G? A: The operating voltage range of XC6124E722MR-G is from 0.8V to 6.0V.

  3. Q: What is the output type of XC6124E722MR-G? A: XC6124E722MR-G has an open-drain output type, which means it can be connected to other devices or circuits with different voltage levels.

  4. Q: What is the typical quiescent current consumption of XC6124E722MR-G? A: The typical quiescent current consumption of XC6124E722MR-G is very low, around 1.0µA.

  5. Q: How does XC6124E722MR-G detect voltage levels? A: XC6124E722MR-G uses a built-in voltage reference and comparator to detect when the input voltage exceeds a certain threshold.

  6. Q: Can XC6124E722MR-G be used for undervoltage detection? A: Yes, XC6124E722MR-G can be used for both overvoltage and undervoltage detection by setting the appropriate threshold voltage.

  7. Q: What is the accuracy of the voltage detection in XC6124E722MR-G? A: The accuracy of voltage detection in XC6124E722MR-G is typically ±1.5%.

  8. Q: Can XC6124E722MR-G be used in battery-powered applications? A: Yes, XC6124E722MR-G is suitable for battery-powered applications due to its low quiescent current consumption.

  9. Q: Does XC6124E722MR-G have any built-in protection features? A: Yes, XC6124E722MR-G has built-in overcurrent protection and thermal shutdown features to protect the IC from damage.

  10. Q: What is the package type of XC6124E722MR-G? A: XC6124E722MR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained designs.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.