Torex Semiconductor Ltd
تصویر کی نمائندگی ہو سکتی ہے۔
پروڈکٹ کی تفصیلات کے لیے وضاحتیں دیکھیں۔
XC6124E522MR-G
تفصیل دیکھیں ڈیٹا شیٹ

XC6124E522MR-G

Product Overview

Category

XC6124E522MR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6124E522MR-G is available in a small SOT-23-5 package.

Essence

The essence of XC6124E522MR-G lies in its ability to provide stable and regulated voltage output for various electronic devices.

Packaging/Quantity

It is typically packaged in reels, with 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 2.2V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 40μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124E522MR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. NC (No Connection)
  4. VOUT (Output Voltage)
  5. EN (Enable)

Functional Features

  • Overcurrent Protection: The XC6124E522MR-G incorporates overcurrent protection, which safeguards the device and the connected circuitry from excessive current flow.
  • Thermal Shutdown Protection: In case of excessive temperature rise, the thermal shutdown feature activates, preventing damage to the regulator and the surrounding components.
  • Low Dropout Voltage: With a low dropout voltage of only 200mV, the XC6124E522MR-G can maintain a stable output even when the input voltage is close to the desired output voltage.
  • Wide Input Voltage Range: The regulator can accept input voltages ranging from 2.5V to 6.0V, making it suitable for a wide range of applications.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into space-constrained designs.
  • High efficiency ensures minimal power loss during voltage regulation.
  • Overcurrent and thermal shutdown protection enhance the reliability and longevity of the device.
  • Wide input voltage range provides flexibility in various applications.

Disadvantages

  • Limited output current of 150mA may not be sufficient for high-power applications.
  • Dropout voltage of 200mV may result in slightly reduced efficiency compared to regulators with lower dropout voltages.

Working Principles

XC6124E522MR-G operates based on the principle of linear voltage regulation. It uses a feedback mechanism to compare the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage despite variations in the input voltage.

Detailed Application Field Plans

XC6124E522MR-G finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable devices - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6124E522MR-G include: - XC6206P332MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT

These alternatives can be considered based on specific requirements and design constraints.

Word count: 411 words

تکنیکی حل میں XC6124E522MR-G کے اطلاق سے متعلق 10 عام سوالات اور جوابات کی فہرست بنائیں

Sure! Here are 10 common questions and answers related to the application of XC6124E522MR-G in technical solutions:

  1. Q: What is XC6124E522MR-G? A: XC6124E522MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is used to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.

  2. Q: What is the operating voltage range of XC6124E522MR-G? A: The operating voltage range of XC6124E522MR-G is typically between 0.8V and 6.0V.

  3. Q: How does XC6124E522MR-G work? A: XC6124E522MR-G works by comparing the input voltage with a reference voltage. When the input voltage drops below the reference voltage, it triggers an internal circuit that generates an output signal.

  4. Q: What is the output type of XC6124E522MR-G? A: XC6124E522MR-G has an open-drain output type, which means it can sink current but cannot source current.

  5. Q: What is the typical quiescent current consumption of XC6124E522MR-G? A: The typical quiescent current consumption of XC6124E522MR-G is very low, usually around 1.0µA.

  6. Q: Can XC6124E522MR-G be used for undervoltage detection in battery-powered applications? A: Yes, XC6124E522MR-G is commonly used for undervoltage detection in battery-powered applications due to its low quiescent current and wide operating voltage range.

  7. Q: Does XC6124E522MR-G have any built-in hysteresis? A: Yes, XC6124E522MR-G has a built-in hysteresis of typically 50mV, which helps to prevent oscillation and provide stable voltage monitoring.

  8. Q: What is the typical response time of XC6124E522MR-G? A: The typical response time of XC6124E522MR-G is very fast, usually around 1µs.

  9. Q: Can XC6124E522MR-G be used in automotive applications? A: Yes, XC6124E522MR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  10. Q: What are some common applications of XC6124E522MR-G? A: XC6124E522MR-G is commonly used in various technical solutions such as battery-powered devices, portable electronics, industrial equipment, automotive systems, and more, where undervoltage detection is critical for proper operation.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.