تصویر کی نمائندگی ہو سکتی ہے۔
پروڈکٹ کی تفصیلات کے لیے وضاحتیں دیکھیں۔
XC6123E522MR-G

XC6123E522MR-G

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Regulator
  • Characteristics: Low Dropout, High Accuracy, Low Quiescent Current
  • Package: SOT-23-5
  • Essence: This IC is designed to regulate voltage in electronic circuits, ensuring a stable output voltage regardless of input variations.
  • Packaging/Quantity: Available in tape and reel packaging, with 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.5V
  • Dropout Voltage: 200mV @ 100mA
  • Quiescent Current: 30µA
  • Output Current: 150mA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The XC6123E522MR-G has a SOT-23-5 package with the following pin configuration:

  1. VOUT: Output Voltage
  2. GND: Ground
  3. EN: Enable Pin
  4. BYP: Bypass Capacitor Connection
  5. VIN: Input Voltage

Functional Features

  • Low Dropout: The XC6123E522MR-G can maintain a stable output voltage even when the input voltage is close to the desired output voltage.
  • High Accuracy: It provides precise regulation of the output voltage, ensuring consistent performance.
  • Low Quiescent Current: The IC consumes minimal current when in standby mode, conserving power.
  • Short Circuit Protection: It includes built-in protection against short circuits, preventing damage to the IC and connected components.

Advantages and Disadvantages

Advantages: - Small form factor and low profile package - Wide input voltage range - High accuracy and low dropout voltage - Low quiescent current for power-saving applications

Disadvantages: - Limited output current capacity (150mA) - Requires an external bypass capacitor for optimal performance

Working Principles

The XC6123E522MR-G is a linear voltage regulator that uses a feedback mechanism to maintain a constant output voltage. It compares the actual output voltage with a reference voltage and adjusts the internal circuitry to compensate for any variations in the input voltage. This ensures a stable output voltage, even when the input voltage fluctuates.

Detailed Application Field Plans

The XC6123E522MR-G is commonly used in various electronic devices and systems, including:

  1. Battery-powered devices: It provides a stable voltage supply for portable electronics such as smartphones, tablets, and wearable devices.
  2. IoT devices: The IC is suitable for low-power IoT applications that require precise voltage regulation.
  3. Automotive electronics: It can be used in automotive systems, such as infotainment systems, sensors, and control modules.
  4. Industrial equipment: The XC6123E522MR-G is suitable for industrial automation, control systems, and instrumentation.

Detailed and Complete Alternative Models

  1. XC6206P332MR-G: Similar voltage regulator with a different package (SOT-89-3).
  2. XC6220B332MR-G: Voltage regulator with higher output current capacity (300mA) and lower dropout voltage.
  3. XC6219B182MR-G: Voltage regulator with a wider input voltage range (1.8V - 6.0V) and lower quiescent current.

These alternative models offer similar functionality but may have different specifications or package options to suit specific application requirements.

Word count: 487 words

تکنیکی حل میں XC6123E522MR-G کے اطلاق سے متعلق 10 عام سوالات اور جوابات کی فہرست بنائیں

Sure! Here are 10 common questions and answers related to the application of XC6123E522MR-G in technical solutions:

  1. Q: What is XC6123E522MR-G? A: XC6123E522MR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides an output signal when it falls below a certain threshold.

  2. Q: What is the operating voltage range of XC6123E522MR-G? A: The operating voltage range of XC6123E522MR-G is typically between 0.8V and 6.0V.

  3. Q: How does XC6123E522MR-G help in technical solutions? A: XC6123E522MR-G helps in technical solutions by providing a reliable way to monitor the power supply voltage and trigger actions or alarms when it goes out of the desired range.

  4. Q: Can XC6123E522MR-G be used in battery-powered applications? A: Yes, XC6123E522MR-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.

  5. Q: What is the output type of XC6123E522MR-G? A: XC6123E522MR-G has an open-drain output, which means it can be easily interfaced with other digital circuits or microcontrollers.

  6. Q: What is the typical accuracy of XC6123E522MR-G? A: The typical accuracy of XC6123E522MR-G is ±1.5% at room temperature.

  7. Q: Can XC6123E522MR-G be used for overvoltage protection? A: No, XC6123E522MR-G is specifically designed for undervoltage detection and does not provide overvoltage protection.

  8. Q: What is the typical response time of XC6123E522MR-G? A: The typical response time of XC6123E522MR-G is around 200µs, making it suitable for fast detection and response to voltage changes.

  9. Q: Can XC6123E522MR-G be used in automotive applications? A: Yes, XC6123E522MR-G is AEC-Q100 qualified, making it suitable for automotive applications where reliable undervoltage detection is required.

  10. Q: Is XC6123E522MR-G available in different package options? A: Yes, XC6123E522MR-G is available in a variety of package options, including SOT-23-5 and USP-6C, providing flexibility for different design requirements.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application guidelines provided by the manufacturer.