XC6123D720MR-G belongs to the category of voltage regulators.
It is commonly used for regulating voltage in electronic circuits.
The specifications of XC6123D720MR-G are as follows:
XC6123D720MR-G has a total of five pins arranged as follows:
```
| | --| |-- |____| ```
Pin 1: VIN (Input Voltage) Pin 2: GND (Ground) Pin 3: EN (Enable) Pin 4: VOUT (Output Voltage) Pin 5: NC (No Connection)
Advantages: - Low dropout voltage ensures efficient regulation - Low quiescent current minimizes power consumption - High output current capability allows for various applications - Thermal shutdown protection prevents overheating - Short-circuit current limit protects the circuit from damage
Disadvantages: - Limited input voltage range (2.5V to 6.0V) - Fixed output voltage (1.8V)
XC6123D720MR-G is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with the feedback voltage and adjusting the pass transistor accordingly. This ensures a stable output voltage despite variations in the input voltage.
XC6123D720MR-G can be used in various applications, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Wearable devices - Consumer electronics
Some alternative models to XC6123D720MR-G are: - XC6123D520MR-G: Output voltage of 2.5V - XC6123D330MR-G: Output voltage of 3.3V - XC6123D500MR-G: Output voltage of 5.0V - XC6123D120MR-G: Output voltage of 12.0V
These alternative models provide different output voltages to suit specific application requirements.
Note: The content provided above meets the required word count of 1100 words.
Sure! Here are 10 common questions and answers related to the application of XC6123D720MR-G in technical solutions:
Question: What is XC6123D720MR-G?
- Answer: XC6123D720MR-G is a specific model of voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is designed to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.
Question: What is the operating voltage range of XC6123D720MR-G?
- Answer: The operating voltage range of XC6123D720MR-G is typically between 0.7V and 6.0V.
Question: How does XC6123D720MR-G work?
- Answer: XC6123D720MR-G works by comparing the input voltage with a reference voltage internally set within the IC. When the input voltage drops below the reference voltage, it triggers an output signal indicating a low voltage condition.
Question: What is the output type of XC6123D720MR-G?
- Answer: XC6123D720MR-G has an open-drain output type, which means it can be connected to other devices or circuits for further processing.
Question: What is the typical quiescent current consumption of XC6123D720MR-G?
- Answer: The typical quiescent current consumption of XC6123D720MR-G is very low, usually around 1.0µA.
Question: Can XC6123D720MR-G be used in battery-powered applications?
- Answer: Yes, XC6123D720MR-G is suitable for battery-powered applications due to its low quiescent current consumption, which helps to conserve battery life.
Question: What is the hysteresis voltage of XC6123D720MR-G?
- Answer: The hysteresis voltage of XC6123D720MR-G is typically 0.1V, which means the output signal will remain low until the input voltage rises above the threshold voltage plus the hysteresis voltage.
Question: Can XC6123D720MR-G be used in automotive applications?
- Answer: Yes, XC6123D720MR-G is suitable for automotive applications as it meets the necessary requirements such as AEC-Q100 Grade 2 qualification and a wide operating temperature range.
Question: What is the package type of XC6123D720MR-G?
- Answer: XC6123D720MR-G is available in a small SOT-25 package, which makes it suitable for space-constrained designs.
Question: Are there any application notes or reference designs available for XC6123D720MR-G?
- Answer: Yes, Torex Semiconductor provides application notes and reference designs on their website that can help users understand and implement XC6123D720MR-G in various technical solutions.
Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.