تصویر کی نمائندگی ہو سکتی ہے۔
پروڈکٹ کی تفصیلات کے لیے وضاحتیں دیکھیں۔
XC6108N25AMR-G

XC6108N25AMR-G

Product Overview

Category

XC6108N25AMR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Package: The XC6108N25AMR-G comes in a small surface-mount package.
  • Essence: This voltage regulator provides stable and reliable voltage output.
  • Packaging/Quantity: It is typically packaged in reels or tubes, with varying quantities depending on the supplier.

Specifications

The specifications of XC6108N25AMR-G are as follows:

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 1.8V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 40µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The detailed pin configuration of XC6108N25AMR-G is as follows:

```


| | --| VIN VOUT |-- --| GND EN |-- |___________| ```

  • VIN: Input voltage pin
  • VOUT: Output voltage pin
  • GND: Ground pin
  • EN: Enable pin

Functional Features

The XC6108N25AMR-G offers the following functional features:

  • Voltage Regulation: It ensures a stable output voltage of 1.8V regardless of input voltage fluctuations.
  • Low Dropout: With a dropout voltage of only 200mV, it can operate efficiently even when the input voltage is close to the desired output voltage.
  • Low Quiescent Current: The quiescent current of 40µA ensures minimal power consumption during standby or idle mode.
  • Enable Pin: The EN pin allows for easy control of the regulator's operation.

Advantages and Disadvantages

Advantages

  • Stable and reliable voltage output
  • Low dropout voltage
  • Low quiescent current
  • Small package size

Disadvantages

  • Limited output current (150mA)

Working Principles

The XC6108N25AMR-G operates based on a linear voltage regulation principle. It uses a feedback mechanism to compare the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage of 1.8V.

Detailed Application Field Plans

XC6108N25AMR-G finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable devices

Alternative Models

Here are some alternative models that can be considered as alternatives to XC6108N25AMR-G:

  1. XC6206P182MR-G: Output Voltage - 1.8V, Output Current - 200mA
  2. LM1117MPX-1.8/NOPB: Output Voltage - 1.8V, Output Current - 800mA
  3. MCP1700T-1802E/TT: Output Voltage - 1.8V, Output Current - 250mA

These alternative models offer similar functionality and can be used as substitutes depending on specific requirements.

In conclusion, XC6108N25AMR-G is a voltage regulator that provides stable and reliable voltage output. With its low dropout voltage and quiescent current, it is suitable for various applications in the field of electronics.

تکنیکی حل میں XC6108N25AMR-G کے اطلاق سے متعلق 10 عام سوالات اور جوابات کی فہرست بنائیں

Sure! Here are 10 common questions and answers related to the application of XC6108N25AMR-G in technical solutions:

  1. Q: What is XC6108N25AMR-G? A: XC6108N25AMR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of XC6108N25AMR-G? A: The operating voltage range of XC6108N25AMR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6108N25AMR-G help in technical solutions? A: XC6108N25AMR-G helps ensure stable operation of electronic devices by monitoring the power supply voltage and generating a reset signal to prevent malfunctioning or data corruption during power fluctuations.

  4. Q: Can XC6108N25AMR-G be used in battery-powered applications? A: Yes, XC6108N25AMR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  5. Q: What is the typical reset threshold voltage of XC6108N25AMR-G? A: The typical reset threshold voltage of XC6108N25AMR-G is 2.5V.

  6. Q: Does XC6108N25AMR-G have an adjustable reset delay time? A: No, XC6108N25AMR-G has a fixed reset delay time of typically 200ms.

  7. Q: Is XC6108N25AMR-G suitable for automotive applications? A: Yes, XC6108N25AMR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  8. Q: Can XC6108N25AMR-G be used in industrial control systems? A: Yes, XC6108N25AMR-G can be used in industrial control systems as it operates reliably in a wide temperature range of -40°C to +105°C.

  9. Q: Does XC6108N25AMR-G have built-in overvoltage protection? A: No, XC6108N25AMR-G does not have built-in overvoltage protection. Additional external circuitry may be required for overvoltage protection.

  10. Q: What package options are available for XC6108N25AMR-G? A: XC6108N25AMR-G is available in a small SOT-23-5 package, which is commonly used in many electronic applications.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.