تصویر کی نمائندگی ہو سکتی ہے۔
پروڈکٹ کی تفصیلات کے لیے وضاحتیں دیکھیں۔
XC6108C20AMR-G

XC6108C20AMR-G

Product Overview

Category

XC6108C20AMR-G belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize the voltage in electronic circuits.

Characteristics

  • Package: SOT-23-5
  • Essence: Low-power voltage regulator
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

The specifications for XC6108C20AMR-G are as follows:

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 2.0V
  • Output Current: 200mA
  • Dropout Voltage: 150mV (typical)
  • Quiescent Current: 40μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6108C20AMR-G has a total of five pins arranged as follows:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. CE: Chip enable pin
  4. VOUT: Output voltage pin
  5. NC: No connection pin

Functional Features

  • Low dropout voltage
  • Low quiescent current
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages

  • Small package size
  • Wide input voltage range
  • Low power consumption
  • Built-in protection features

Disadvantages

  • Limited output current capacity
  • Fixed output voltage

Working Principles

XC6108C20AMR-G works by regulating the input voltage to a fixed output voltage of 2.0V. It achieves this by using an internal voltage reference and feedback control mechanism. The regulator continuously monitors the output voltage and adjusts the internal circuitry to maintain a stable output voltage, even when the input voltage or load conditions change.

Detailed Application Field Plans

XC6108C20AMR-G is commonly used in various electronic devices and circuits that require a stable 2.0V power supply. Some typical application fields include:

  1. Battery-powered devices
  2. Portable electronics
  3. IoT devices
  4. Wearable devices
  5. Sensor modules

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6108C20AMR-G are:

  1. XC6206P202MR-G: Fixed 2.0V voltage regulator with higher output current capacity.
  2. XC6220B202MR-G: Adjustable voltage regulator with a similar package and output voltage range.
  3. XC6219B202MR-G: Low-power voltage regulator with additional protection features.

These alternative models provide flexibility in terms of output voltage options, output current capacity, and additional features based on specific application requirements.

Word count: 346 words

تکنیکی حل میں XC6108C20AMR-G کے اطلاق سے متعلق 10 عام سوالات اور جوابات کی فہرست بنائیں

Sure! Here are 10 common questions and answers related to the application of XC6108C20AMR-G in technical solutions:

1. What is XC6108C20AMR-G? - XC6108C20AMR-G is a voltage detector IC (Integrated Circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

2. What is the operating voltage range of XC6108C20AMR-G? - The operating voltage range of XC6108C20AMR-G is typically between 0.9V and 6.0V.

3. How does XC6108C20AMR-G help in technical solutions? - XC6108C20AMR-G helps in technical solutions by ensuring stable operation of electronic devices by monitoring the power supply voltage and providing a reset signal when it falls below a specified level.

4. What is the typical reset voltage of XC6108C20AMR-G? - The typical reset voltage of XC6108C20AMR-G is 2.0V.

5. Can XC6108C20AMR-G be used in battery-powered applications? - Yes, XC6108C20AMR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes very low current.

6. Does XC6108C20AMR-G have any built-in delay circuitry? - Yes, XC6108C20AMR-G has a built-in delay circuitry that ensures a stable reset signal is provided for a specific duration after the power supply voltage rises above the reset voltage.

7. Is XC6108C20AMR-G suitable for automotive applications? - Yes, XC6108C20AMR-G is suitable for automotive applications as it can withstand high temperatures and has a wide operating voltage range.

8. Can XC6108C20AMR-G be used in industrial control systems? - Yes, XC6108C20AMR-G can be used in industrial control systems as it provides reliable reset signals to ensure proper functioning of the system.

9. What is the package type of XC6108C20AMR-G? - XC6108C20AMR-G is available in a small SOT-23-5 package.

10. Are there any application notes or reference designs available for XC6108C20AMR-G? - Yes, the manufacturer of XC6108C20AMR-G provides application notes and reference designs that can help in understanding its usage and integration into various technical solutions.

Please note that the answers provided here are general and may vary depending on the specific requirements and datasheet of XC6108C20AMR-G.