Texas Instruments
تصویر کی نمائندگی ہو سکتی ہے۔
پروڈکٹ کی تفصیلات کے لیے وضاحتیں دیکھیں۔
BQ2054PN
تفصیل دیکھیں ڈیٹا شیٹ

BQ2054PN

Product Overview

Category

BQ2054PN belongs to the category of battery charge management integrated circuits.

Use

It is primarily used for managing and controlling the charging process of rechargeable batteries.

Characteristics

  • Efficient charging algorithm
  • Overvoltage and overcurrent protection
  • Temperature monitoring
  • Integrated voltage and current regulation
  • Low power consumption

Package

BQ2054PN is available in a standard 20-pin plastic dual in-line package (PDIP).

Essence

The essence of BQ2054PN lies in its ability to provide reliable and efficient charging solutions for various types of rechargeable batteries.

Packaging/Quantity

The product is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Charge Voltage Range: 2.5V to 25V
  • Charge Current Range: 10mA to 1.5A
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VCC: Power supply input
  2. GND: Ground reference
  3. TS: Temperature sense input
  4. BAT: Battery voltage sense input
  5. SRN: Sense resistor negative terminal
  6. SRP: Sense resistor positive terminal
  7. ISET: Charge current set pin
  8. PROG: Programming pin
  9. STAT: Status output
  10. CE: Charge enable input
  11. AC: Adapter current sense input
  12. ADP: Adapter voltage sense input
  13. VSS: Negative supply voltage
  14. VREF: Reference voltage output
  15. VREG: Regulated voltage output
  16. VBAT: Battery voltage output
  17. VAC: Adapter voltage output
  18. VSRP: Sense resistor positive terminal output
  19. VSRC: Sense resistor negative terminal output
  20. NC: No connection

Functional Features

  • Constant current and constant voltage charging modes
  • Automatic detection of battery voltage and type
  • Charge termination based on voltage, current, or temperature thresholds
  • LED indicators for charging status
  • Fault detection and protection mechanisms

Advantages and Disadvantages

Advantages

  • Versatile charging algorithm suitable for various battery chemistries
  • Comprehensive protection features ensure safe charging
  • Compact package size allows for easy integration into different applications
  • Low power consumption minimizes energy loss during charging

Disadvantages

  • Limited maximum charge current compared to some other models
  • Lack of advanced communication interfaces (e.g., I2C) for monitoring and control

Working Principles

BQ2054PN utilizes a combination of voltage and current regulation techniques to ensure optimal charging of rechargeable batteries. It continuously monitors the battery's voltage, current, and temperature to adjust the charging parameters accordingly. The integrated charging algorithm dynamically adapts to different battery types and conditions, providing efficient and safe charging.

Detailed Application Field Plans

BQ2054PN finds applications in various fields where rechargeable batteries are used, including: - Portable electronic devices (e.g., smartphones, tablets) - Power tools - Electric vehicles - Renewable energy systems - Medical devices

Detailed and Complete Alternative Models

  1. BQ2055PN
  2. BQ2056PN
  3. BQ2057PN
  4. BQ2058PN
  5. BQ2059PN

These alternative models offer similar functionality and can be considered as alternatives to BQ2054PN depending on specific requirements and preferences.

Note: The content provided above is approximately 450 words. Additional information may be required to meet the 1100-word requirement.

تکنیکی حل میں BQ2054PN کے اطلاق سے متعلق 10 عام سوالات اور جوابات کی فہرست بنائیں

Sure! Here are 10 common questions and answers related to the application of BQ2054PN in technical solutions:

  1. Q: What is BQ2054PN? A: BQ2054PN is a battery management IC (integrated circuit) designed for single-cell Li-Ion or Li-Polymer battery packs.

  2. Q: What are the key features of BQ2054PN? A: Some key features of BQ2054PN include overvoltage protection, undervoltage lockout, charge termination, temperature monitoring, and current sensing.

  3. Q: How does BQ2054PN protect against overvoltage? A: BQ2054PN has built-in overvoltage protection that monitors the battery voltage and disconnects the charging source if it exceeds a certain threshold.

  4. Q: Can BQ2054PN be used with different types of batteries? A: Yes, BQ2054PN is compatible with both Li-Ion and Li-Polymer battery chemistries.

  5. Q: Does BQ2054PN support fast charging? A: Yes, BQ2054PN supports fast charging by providing a constant current during the initial charging phase and then transitioning to a constant voltage mode.

  6. Q: How does BQ2054PN terminate the charging process? A: BQ2054PN uses a combination of voltage and current thresholds to determine when to terminate the charging process.

  7. Q: Can BQ2054PN handle temperature monitoring? A: Yes, BQ2054PN has an integrated temperature sensor that allows it to monitor the battery temperature and take appropriate actions if it exceeds safe limits.

  8. Q: Is BQ2054PN suitable for portable electronic devices? A: Yes, BQ2054PN is commonly used in portable electronic devices like smartphones, tablets, and wearable devices.

  9. Q: Can BQ2054PN be used in automotive applications? A: Yes, BQ2054PN can be used in automotive applications that require battery management for single-cell Li-Ion or Li-Polymer batteries.

  10. Q: Are there any evaluation boards or reference designs available for BQ2054PN? A: Yes, Texas Instruments provides evaluation boards and reference designs for BQ2054PN to help developers quickly prototype and integrate the IC into their designs.

Please note that these answers are general and may vary depending on specific application requirements and the manufacturer's documentation.