تصویر کی نمائندگی ہو سکتی ہے۔
پروڈکٹ کی تفصیلات کے لیے وضاحتیں دیکھیں۔
74LVX245MX

74LVX245MX

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Level Shifter and Bus Transceiver
  • Characteristics: High-Speed, Low-Power, Bidirectional Voltage Translation
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: Logic Level Conversion and Signal Transmission
  • Packaging/Quantity: Tape and Reel, 2500 pieces per reel

Specifications

  • Supply Voltage Range: 1.65V to 5.5V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Maximum Operating Frequency: 100MHz
  • Number of Channels: 8
  • Input/Output Type: Tri-State
  • Propagation Delay Time: 6ns (max) at 3.3V supply
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The 74LVX245MX IC has a total of 20 pins, which are assigned as follows:

  • Pins 1 to 8: A1 to A8 (Input/Output Channels A)
  • Pins 9 to 16: B1 to B8 (Input/Output Channels B)
  • Pin 17: OE (Output Enable)
  • Pin 18: GND (Ground)
  • Pin 19: BDIR (Direction Control)
  • Pin 20: VCC (Supply Voltage)

Functional Features

  • Bidirectional Voltage Translation: Allows for seamless communication between devices operating at different voltage levels.
  • Tri-State Outputs: Enables the bus transceiver to be disconnected from the bus, reducing power consumption and preventing conflicts.
  • High-Speed Operation: Supports data rates up to 100MHz, making it suitable for applications requiring fast signal transmission.
  • Low Power Consumption: Designed to minimize power consumption, making it ideal for battery-powered devices.
  • ESD Protection: Provides Electrostatic Discharge (ESD) protection, ensuring the IC's reliability in harsh environments.

Advantages and Disadvantages

Advantages: - Wide supply voltage range allows compatibility with various systems. - Bidirectional capability simplifies circuit design and reduces component count. - Tri-State outputs enable bus sharing and reduce power consumption. - High-speed operation supports fast data transmission. - ESD protection enhances reliability.

Disadvantages: - Limited number of channels (8) may not be sufficient for complex systems requiring more connections. - Propagation delay time may affect timing-sensitive applications.

Working Principles

The 74LVX245MX is a level shifter and bus transceiver that facilitates communication between devices operating at different voltage levels. It utilizes a bidirectional voltage translation technique to convert logic signals from one voltage level to another. The direction of data flow is controlled by the BDIR pin. When BDIR is high, data flows from Channels A to Channels B, and when BDIR is low, data flows in the opposite direction.

The tri-state outputs allow the IC to be disconnected from the bus, preventing conflicts and reducing power consumption. The OE pin controls the output enable/disable function. When OE is low, the outputs are enabled, and when OE is high, the outputs are disabled.

Detailed Application Field Plans

The 74LVX245MX is widely used in various applications, including:

  1. Microcontroller Interfacing: It enables communication between microcontrollers operating at different voltage levels.
  2. Level Shifting: It converts logic signals between different voltage domains, facilitating compatibility between different integrated circuits.
  3. Bus Transceivers: It acts as a bridge between buses with different voltage levels, allowing seamless data transfer.
  4. Battery-Powered Devices: Its low-power characteristics make it suitable for portable electronics, such as smartphones and tablets.
  5. Industrial Automation: It is used in control systems to interface between different voltage levels and ensure reliable data transmission.

Detailed and Complete Alternative Models

  1. SN74LVC245A: Similar functionality with a wider supply voltage range (1.2V to 3.6V).
  2. CD4508B: Dual 4-bit bidirectional bus transceiver with similar characteristics.
  3. TXS0108E: 8-channel level shifter with voltage translation capability up to 24V.

These alternative models offer similar features and can be considered based on specific application requirements.

Word count: 529 words

تکنیکی حل میں 74LVX245MX کے اطلاق سے متعلق 10 عام سوالات اور جوابات کی فہرست بنائیں

Sure! Here are 10 common questions and answers related to the application of 74LVX245MX in technical solutions:

  1. Q: What is the 74LVX245MX? A: The 74LVX245MX is a high-speed octal bus transceiver with non-inverting 3-state outputs.

  2. Q: What is the purpose of the 74LVX245MX? A: The purpose of this IC is to enable bidirectional level shifting between two buses operating at different voltage levels.

  3. Q: What is the maximum operating voltage for the 74LVX245MX? A: The maximum operating voltage is 5.5V.

  4. Q: Can the 74LVX245MX be used for level shifting between 3.3V and 5V systems? A: Yes, it can be used for level shifting between these voltage levels.

  5. Q: How many channels does the 74LVX245MX have? A: It has 8 bidirectional channels.

  6. Q: What is the maximum data transfer rate supported by the 74LVX245MX? A: The maximum data transfer rate is typically 400Mbps.

  7. Q: Does the 74LVX245MX support 3-state outputs? A: Yes, it supports 3-state outputs, allowing multiple devices to share a common bus.

  8. Q: Can the 74LVX245MX be used in both parallel and serial communication systems? A: Yes, it can be used in both parallel and serial communication systems.

  9. Q: Is the 74LVX245MX compatible with TTL and CMOS logic levels? A: Yes, it is compatible with both TTL and CMOS logic levels.

  10. Q: What is the recommended power supply voltage for the 74LVX245MX? A: The recommended power supply voltage is typically between 2V and 5.5V.

Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.