ON Semiconductor
تصویر کی نمائندگی ہو سکتی ہے۔
پروڈکٹ کی تفصیلات کے لیے وضاحتیں دیکھیں۔
74F257ASC
تفصیل دیکھیں ڈیٹا شیٹ

Encyclopedia Entry: 74F257ASC

Product Overview

Category

The 74F257ASC belongs to the category of integrated circuits (ICs) and specifically falls under the family of digital multiplexers.

Use

This IC is primarily used for data multiplexing applications in digital systems. It allows multiple input signals to be selected and routed to a single output line, based on control inputs.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Compatibility with various logic families
  • Compact package size

Package

The 74F257ASC is available in a small outline integrated circuit (SOIC) package. This package offers a compact form factor and ease of integration into electronic circuits.

Essence

The essence of the 74F257ASC lies in its ability to efficiently multiplex data signals, enabling effective data routing and selection within digital systems.

Packaging/Quantity

The 74F257ASC is typically packaged in reels or tubes, containing a quantity of 250 units per package.

Specifications

  • Supply Voltage Range: 4.5V to 5.5V
  • Input Voltage Range: 0V to Vcc
  • Output Voltage Range: 0V to Vcc
  • Operating Temperature Range: -40°C to +85°C
  • Propagation Delay Time: 7 ns (max)
  • Input Capacitance: 3 pF (typ)
  • Output Capacitance: 6 pF (typ)

Detailed Pin Configuration

The 74F257ASC has a total of 16 pins, each serving a specific function:

  1. A1: Data Input A
  2. B1: Data Input B
  3. C1: Data Input C
  4. D1: Data Input D
  5. G1: Enable Input G
  6. Y1: Output Y
  7. GND: Ground
  8. Y2: Output Y
  9. G2: Enable Input G
  10. D2: Data Input D
  11. C2: Data Input C
  12. B2: Data Input B
  13. A2: Data Input A
  14. Vcc: Supply Voltage
  15. NC: No Connection
  16. NC: No Connection

Functional Features

  • 4-bit data multiplexing capability
  • Independent enable inputs for each set of data inputs and outputs
  • High-speed operation allows for efficient data routing
  • Low power consumption ensures energy efficiency
  • Wide operating voltage range enables compatibility with various digital systems

Advantages and Disadvantages

Advantages

  • High-speed operation facilitates quick data selection and routing
  • Low power consumption reduces energy requirements
  • Compact package size allows for space-efficient integration
  • Wide operating voltage range enhances compatibility with different systems

Disadvantages

  • Limited to 4-bit data multiplexing, may not be suitable for applications requiring higher bit capacity
  • Propagation delay time may impact real-time data processing in certain scenarios

Working Principles

The 74F257ASC operates based on the principles of digital multiplexing. It utilizes control inputs (G1 and G2) to select one of the four data inputs (A1-D1 or A2-D2) and routes it to the corresponding output (Y1 or Y2). The selected input is determined by the binary combination applied to the control inputs.

Detailed Application Field Plans

The 74F257ASC finds application in various digital systems, including but not limited to: - Data communication equipment - Microcontrollers - Digital signal processors - Industrial automation systems - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the 74F257ASC include: - 74HC257: A CMOS-based quad 2-input multiplexer - CD4051: An analog multiplexer/demultiplexer IC with 8 channels - SN74LS151: A TTL-based 8-input multiplexer

These alternative models can be considered based on specific application requirements and compatibility with the existing system.

Word count: 515 words

تکنیکی حل میں 74F257ASC کے اطلاق سے متعلق 10 عام سوالات اور جوابات کی فہرست بنائیں

Sure! Here are 10 common questions and answers related to the application of 74F257ASC in technical solutions:

  1. Q: What is the 74F257ASC? A: The 74F257ASC is a quad 2-input multiplexer with 3-state outputs, commonly used in digital logic circuits.

  2. Q: What is the purpose of a multiplexer? A: A multiplexer is used to select one of several input signals and route it to a single output line based on control inputs.

  3. Q: How many inputs can the 74F257ASC handle? A: The 74F257ASC has four data inputs (A, B, C, D) and two select inputs (S0, S1).

  4. Q: What is the function of the select inputs (S0, S1)? A: The select inputs determine which input signal is routed to the output. The combination of S0 and S1 determines the active input.

  5. Q: Can the 74F257ASC handle multiple outputs? A: No, the 74F257ASC has only one output line.

  6. Q: What are 3-state outputs? A: 3-state outputs allow the output line to be in three different states: high, low, or high impedance (disconnected).

  7. Q: How can I control the 3-state outputs of the 74F257ASC? A: The 74F257ASC has an enable input (G) that controls the output state. When G is low, the outputs are enabled; when G is high, the outputs are in high impedance state.

  8. Q: What is the power supply voltage range for the 74F257ASC? A: The 74F257ASC typically operates with a power supply voltage range of 4.5V to 5.5V.

  9. Q: Can the 74F257ASC handle high-speed signals? A: Yes, the 74F257ASC is designed for high-speed operation and can handle signals with fast switching times.

  10. Q: What are some common applications of the 74F257ASC? A: The 74F257ASC is commonly used in digital systems for data routing, signal selection, address decoding, and bus interfacing.

Please note that these answers are general and may vary depending on specific circuit designs and requirements.