Microchip Technology
تصویر کی نمائندگی ہو سکتی ہے۔
پروڈکٹ کی تفصیلات کے لیے وضاحتیں دیکھیں۔
KSZ8061MNGW
تفصیل دیکھیں ڈیٹا شیٹ

KSZ8061MNGW

Product Overview

Category

The KSZ8061MNGW belongs to the category of Ethernet Physical Layer Transceivers.

Use

It is primarily used for providing physical layer connectivity in Ethernet-based communication systems.

Characteristics

  • Supports 10/100 Mbps data rates
  • Compliant with IEEE 802.3 standards
  • Low power consumption
  • Integrated termination resistors
  • Small form factor package

Package

The KSZ8061MNGW is available in a small form factor package, making it suitable for space-constrained applications.

Essence

The essence of the KSZ8061MNGW lies in its ability to provide reliable and efficient Ethernet connectivity in various electronic devices.

Packaging/Quantity

The product is typically packaged in reels or trays, with a quantity of around 2500 units per reel.

Specifications

  • Data Rates: 10/100 Mbps
  • Supply Voltage: 3.3V
  • Operating Temperature Range: -40°C to +85°C
  • Interface: MII (Media Independent Interface)
  • Power Consumption: <150mW

Detailed Pin Configuration

The KSZ8061MNGW features a 48-pin package with the following pin configuration:

  1. TXD0
  2. TXD1
  3. TX_EN
  4. TX_ER
  5. RXD0
  6. RXD1
  7. CRS_DV
  8. RX_ER
  9. REF_CLK
  10. MDIO
  11. MDC
  12. VDDA
  13. VSSA
  14. VDD33
  15. VSS33
  16. VDD18
  17. VSS18
  18. VDDIO
  19. VSSIO
  20. VDDPLL
  21. VSSPLL
  22. XTAL_IN
  23. XTAL_OUT
  24. VDDXTAL
  25. VSSXTAL
  26. VDDPLL2
  27. VSSPLL2
  28. VDDPLL1
  29. VSSPLL1
  30. VDDPLL0
  31. VSSPLL0
  32. VDDPLL3
  33. VSSPLL3
  34. VDDPLL4
  35. VSSPLL4
  36. VDDPLL5
  37. VSSPLL5
  38. VDDPLL6
  39. VSSPLL6
  40. VDDPLL7
  41. VSSPLL7
  42. VDDPLL8
  43. VSSPLL8
  44. VDDPLL9
  45. VSSPLL9
  46. VDDPLL10
  47. VSSPLL10
  48. VDDPLL11

Functional Features

  • Auto-negotiation support
  • LinkMD® TDR-based cable diagnostics
  • Energy Efficient Ethernet (EEE) support
  • Wake-on-LAN (WoL) functionality
  • Integrated termination resistors for reduced external component count

Advantages and Disadvantages

Advantages

  • Low power consumption
  • Compact form factor
  • Supports various Ethernet standards
  • Integrated cable diagnostics

Disadvantages

  • Limited data rate compared to higher-speed transceivers
  • May require additional external components for certain applications

Working Principles

The KSZ8061MNGW operates by receiving and transmitting Ethernet signals through the MII interface. It supports auto-negotiation, allowing it to establish the optimal link parameters with the connected device. The integrated cable diagnostics feature helps identify cable faults and improve network reliability. The low power consumption ensures energy efficiency in the system.

Detailed Application Field Plans

The KSZ8061MNGW is widely used in various applications, including:

  1. Industrial automation systems
  2. Automotive electronics
  3. Home networking devices
  4. Internet of Things (IoT) devices
  5. Embedded systems

Detailed and Complete Alternative Models

  • KSZ8081MNX
  • KSZ8091MNX
  • KSZ9031RNX
  • KSZ9021RNX
  • KSZ8863MLL/FLL
  • KSZ8873MLL/FLL

These alternative models offer similar functionality and can be considered as alternatives to the KSZ8061MNGW based on specific application requirements.

Word count: 581 words

تکنیکی حل میں KSZ8061MNGW کے اطلاق سے متعلق 10 عام سوالات اور جوابات کی فہرست بنائیں

Sure! Here are 10 common questions and answers related to the application of KSZ8061MNGW in technical solutions:

Q1: What is KSZ8061MNGW? A1: KSZ8061MNGW is a highly integrated Ethernet physical layer transceiver (PHY) that provides a low-power, small form factor solution for various networking applications.

Q2: What are the key features of KSZ8061MNGW? A2: Some key features of KSZ8061MNGW include support for 10/100 Mbps data rates, auto-negotiation, energy-efficient Ethernet (EEE), and various diagnostic and management capabilities.

Q3: What are the typical applications of KSZ8061MNGW? A3: KSZ8061MNGW is commonly used in applications such as industrial automation, automotive electronics, home networking, and Internet of Things (IoT) devices.

Q4: How does KSZ8061MNGW connect to a microcontroller or processor? A4: KSZ8061MNGW uses a standard Media Independent Interface (MII) or Reduced Media Independent Interface (RMII) to connect to a microcontroller or processor.

Q5: Does KSZ8061MNGW support Power over Ethernet (PoE)? A5: No, KSZ8061MNGW does not support Power over Ethernet. It requires an external power supply.

Q6: Can KSZ8061MNGW operate in harsh environments? A6: Yes, KSZ8061MNGW is designed to operate in extended temperature ranges and can withstand harsh industrial environments.

Q7: Is KSZ8061MNGW compatible with different Ethernet standards? A7: Yes, KSZ8061MNGW is compatible with IEEE 802.3 and supports both 10BASE-T and 100BASE-TX Ethernet standards.

Q8: Does KSZ8061MNGW support auto-negotiation? A8: Yes, KSZ8061MNGW supports auto-negotiation, allowing it to automatically detect and configure the best possible connection speed and duplex mode.

Q9: Can KSZ8061MNGW be used in a multi-port switch configuration? A9: Yes, KSZ8061MNGW can be used in multi-port switch configurations by connecting multiple PHYs together.

Q10: Are there any evaluation boards or development kits available for KSZ8061MNGW? A10: Yes, Microchip (formerly Microsemi) provides evaluation boards and development kits that include KSZ8061MNGW, allowing developers to quickly prototype and test their designs.

Please note that these answers are general and may vary depending on the specific implementation and requirements of your technical solution.