Intersil
تصویر کی نمائندگی ہو سکتی ہے۔
پروڈکٹ کی تفصیلات کے لیے وضاحتیں دیکھیں۔
ISL8484IR-T
تفصیل دیکھیں ڈیٹا شیٹ

ISL8484IR-T

Product Overview

Category

ISL8484IR-T belongs to the category of integrated circuits (ICs).

Use

This product is commonly used for communication and data transmission purposes.

Characteristics

  • Integrated circuit
  • Designed for communication applications
  • Enables reliable data transmission

Package

ISL8484IR-T comes in a small outline integrated circuit (SOIC) package.

Essence

The essence of ISL8484IR-T lies in its ability to facilitate efficient and secure communication by transmitting data reliably.

Packaging/Quantity

ISL8484IR-T is typically packaged in reels, with each reel containing a specific quantity of ICs.

Specifications

The specifications of ISL8484IR-T are as follows:

  • Supply Voltage: 3.0V to 5.5V
  • Data Rate: Up to 2.5Mbps
  • Number of Channels: 1
  • Operating Temperature Range: -40°C to +85°C
  • Interface Type: RS-485/RS-422

Detailed Pin Configuration

The pin configuration of ISL8484IR-T is as follows:

  1. DE (Driver Output Enable)
  2. A (Non-Inverting Driver Input)
  3. B (Inverting Driver Input)
  4. GND (Ground)
  5. Y (Receiver Output)
  6. Z (Receiver Output)
  7. Vcc (Supply Voltage)
  8. RE (Receiver Output Enable)

Functional Features

ISL8484IR-T offers the following functional features:

  • High-speed data transmission
  • Half-duplex communication
  • Enhanced ESD protection
  • Low power consumption
  • Wide supply voltage range

Advantages and Disadvantages

Advantages: - Reliable data transmission - Enhanced ESD protection - Wide operating temperature range

Disadvantages: - Limited number of channels (1)

Working Principles

ISL8484IR-T operates based on the RS-485/RS-422 communication standard. It uses differential signaling to transmit data, allowing for noise immunity and long-distance communication.

Detailed Application Field Plans

ISL8484IR-T finds applications in various fields, including:

  1. Industrial automation
  2. Building automation
  3. Automotive systems
  4. Telecommunications
  5. Security systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to ISL8484IR-T are:

  1. MAX485
  2. SN75176
  3. LTC1480
  4. ADM485
  5. SP3485

These models offer similar functionality and can be used as replacements depending on specific requirements.

In conclusion, ISL8484IR-T is an integrated circuit designed for communication applications. It offers reliable data transmission, enhanced ESD protection, and operates based on the RS-485/RS-422 standard. With its wide range of applications and alternative models available, ISL8484IR-T proves to be a versatile choice for various industries.

تکنیکی حل میں ISL8484IR-T کے اطلاق سے متعلق 10 عام سوالات اور جوابات کی فہرست بنائیں

Sure! Here are 10 common questions and answers related to the application of ISL8484IR-T in technical solutions:

  1. Q: What is ISL8484IR-T? A: ISL8484IR-T is a high-speed, low-power, differential bus transceiver commonly used in industrial applications.

  2. Q: What is the operating voltage range of ISL8484IR-T? A: The operating voltage range of ISL8484IR-T is typically between 3V and 5.5V.

  3. Q: Can ISL8484IR-T be used for half-duplex communication? A: Yes, ISL8484IR-T supports both half-duplex and full-duplex communication modes.

  4. Q: What is the maximum data rate supported by ISL8484IR-T? A: ISL8484IR-T can support data rates up to 20 Mbps.

  5. Q: Does ISL8484IR-T have built-in ESD protection? A: Yes, ISL8484IR-T has built-in ±15kV ESD protection on the bus pins.

  6. Q: Can ISL8484IR-T be used in harsh industrial environments? A: Yes, ISL8484IR-T is designed to operate in harsh industrial environments with extended temperature ranges and robust EMC performance.

  7. Q: How many transceivers are there in ISL8484IR-T? A: ISL8484IR-T consists of four independent transceivers in a single package.

  8. Q: Can ISL8484IR-T be used with different types of cables? A: Yes, ISL8484IR-T is compatible with various cable types, including twisted-pair cables and shielded cables.

  9. Q: Does ISL8484IR-T support hot-swapping of devices? A: Yes, ISL8484IR-T supports hot-swapping, allowing devices to be connected or disconnected while the bus is active.

  10. Q: What are some typical applications of ISL8484IR-T? A: ISL8484IR-T is commonly used in industrial automation, motor control systems, robotics, and other applications requiring reliable communication over long distances.

Please note that these answers are general and may vary depending on specific implementation requirements.