تصویر کی نمائندگی ہو سکتی ہے۔
پروڈکٹ کی تفصیلات کے لیے وضاحتیں دیکھیں۔
S-80943CNPF-G9DTFG

S-80943CNPF-G9DTFG

Product Overview

Category

S-80943CNPF-G9DTFG belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage detection and reset functions.

Characteristics

  • Voltage detection range: 1.0V to 6.0V
  • Low supply current: 1.0μA (typ.)
  • Reset output type: N-channel open drain
  • Operating temperature range: -40°C to +85°C
  • Small package size: SOT-23-5

Package

The S-80943CNPF-G9DTFG is packaged in a small outline transistor (SOT) package, specifically SOT-23-5.

Essence

The essence of S-80943CNPF-G9DTFG lies in its ability to accurately detect voltage levels within a specified range and provide a reset signal when necessary.

Packaging/Quantity

This product is typically available in tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Supply voltage range: 1.0V to 6.0V
  • Detection voltage accuracy: ±2.0%
  • Quiescent current: 1.0μA (typ.)
  • Output voltage low: 0.4V (max.)
  • Output current: 5mA (max.)
  • Power-on reset delay time: 200ms (typ.)

Detailed Pin Configuration

The S-80943CNPF-G9DTFG has five pins arranged as follows:

```


| | --| |-- |____| ```

Pin 1: VDD (Supply Voltage) Pin 2: GND (Ground) Pin 3: RESET (Reset Output) Pin 4: CE (Chip Enable) Pin 5: VOUT (Voltage Detection Output)

Functional Features

  1. Voltage Detection: The S-80943CNPF-G9DTFG can accurately detect voltage levels within the specified range.
  2. Reset Function: It provides a reset signal when the detected voltage falls below the threshold.
  3. Low Power Consumption: With a quiescent current of only 1.0μA, this IC minimizes power consumption in electronic devices.

Advantages and Disadvantages

Advantages

  • Wide voltage detection range
  • Low power consumption
  • Accurate voltage detection
  • Small package size for space-constrained applications

Disadvantages

  • Limited output current capacity (5mA max.)

Working Principles

The S-80943CNPF-G9DTFG operates by continuously monitoring the input voltage level. When the voltage falls below the detection threshold, the reset output is activated, providing a signal to reset the connected device. This ensures proper operation and prevents malfunctions due to insufficient voltage.

Detailed Application Field Plans

The S-80943CNPF-G9DTFG finds application in various electronic devices where voltage detection and reset functions are crucial. Some potential application fields include:

  1. Battery-Powered Devices: Ensures proper functioning by detecting low battery voltage and triggering a reset.
  2. Microcontrollers: Provides a reliable reset signal during power-up or voltage fluctuations.
  3. Industrial Control Systems: Monitors supply voltage levels to prevent system failures and ensure stable operation.
  4. Automotive Electronics: Protects sensitive components from voltage drops and initiates necessary actions.

Detailed and Complete Alternative Models

  1. S-80942CNPF-G8XTFG: Similar to S-80943CNPF-G9DTFG but with a different detection voltage range (0.9V to 5.5V).
  2. S-80944CNPF-G9JT2G: Offers a higher detection voltage range (1.5V to 6.5V) and increased output current capacity (10mA max.).
  3. S-80945CNPF-G9XTFG: Provides an extended temperature range (-40°C to +105°C) for demanding environments.

These alternative models offer similar functionality with slight variations in voltage ranges, output currents, or operating conditions, allowing users to choose the most suitable option for their specific requirements.

Word count: 536 words

تکنیکی حل میں S-80943CNPF-G9DTFG کے اطلاق سے متعلق 10 عام سوالات اور جوابات کی فہرست بنائیں

Sure! Here are 10 common questions and answers related to the application of S-80943CNPF-G9DTFG in technical solutions:

1. What is S-80943CNPF-G9DTFG? - S-80943CNPF-G9DTFG is a specific model of voltage detector IC (integrated circuit) manufactured by a company called "SII Semiconductor Corporation."

2. What is the purpose of S-80943CNPF-G9DTFG? - The purpose of this voltage detector IC is to monitor the voltage level of a power supply and provide an output signal when the voltage falls below or exceeds a certain threshold.

3. What are the key features of S-80943CNPF-G9DTFG? - Some key features of this IC include low current consumption, high accuracy, wide operating voltage range, built-in delay circuit, and small package size.

4. What is the operating voltage range of S-80943CNPF-G9DTFG? - The operating voltage range of this IC is typically between 1.6V and 6.0V.

5. How does S-80943CNPF-G9DTFG detect voltage levels? - This IC uses a built-in voltage reference and comparator circuit to compare the input voltage with a preset threshold voltage.

6. Can S-80943CNPF-G9DTFG be used in battery-powered applications? - Yes, this IC can be used in battery-powered applications as it has low current consumption, making it suitable for power-sensitive devices.

7. What is the output format of S-80943CNPF-G9DTFG? - The output format of this IC is typically an active-low signal, meaning the output goes low when the voltage falls below the threshold.

8. Is S-80943CNPF-G9DTFG suitable for automotive applications? - Yes, this IC is designed to meet the requirements of automotive applications and can be used in various automotive systems.

9. Can S-80943CNPF-G9DTFG be used in industrial control systems? - Absolutely! This IC is well-suited for industrial control systems where voltage monitoring and detection are crucial.

10. Are there any application notes or reference designs available for S-80943CNPF-G9DTFG? - Yes, the manufacturer provides application notes and reference designs that can help users understand and implement this IC effectively in their technical solutions.

Please note that the answers provided here are general and may vary depending on the specific requirements and use cases. It's always recommended to refer to the datasheet and documentation provided by the manufacturer for accurate and detailed information.